covering old deck with composite

Features, Benefits and Technical Details

Often only a few boards have to be replaced, requiring the existing siding to be crosscut in place with a circular saw and removed The new siding can be blind nailed near the top of the siding, so the row above it covers the nails or the siding can be face nailed near the bottom with the nails exposed Be sure to use

Want to hire a pro for this project This Old House has partnered with HomeAdvisor to connect you with trusted home improvement pros! Dry fit beadboard pieces across the long sides, adjusting them so that they cover the open space between the legs but fall short of the gaps you marked Center the slats on the frame,

cedar, composite, or plastic To protect the new material, paint or stain all sides and ends of the flooring and railings Turned spindles on porch railings can be duplicated on a lathe in a woodworking shop with an existing spindle used as a pattern to turn the replacements When replacing rotten porch flooring, the columns

Jun , The big headache is securing a tarp to cover the pool When I had pressure treated I recently replaced the pressure treated boards with composite decking There is no way I m going to I heard about these DeckKeeper Tie Down devices from Ask This Old House a few years ago They slip between the

But eventually we get the hang of it, and Brad starts coating the vertical surfaces with a masonry brush while I work on the horizontal Brad It s working out As we get each step coated, we re also using the brush to add a textured finish to the surface, so it ll be safer to walk on than the old slick surface And you want to do

Rust Oleum Deck Restore gives new life to an old deck Deck Concrete Restore is After witnessing their experience, I was convinced composite decking was the way to go However, the cost for Rust Oleum kindly provided enough Deck Restore to cover the horizontal surfaces of our deck and stairs Deck Restore isn t

Mar , The new column goes into the same location as the old one With the top in the corner, we move the bottom in and out and side to side until it is perfectly plumb Then we slowly release the jack so the beam rests on the new column A few pieces of trim cover the metal plinth block and the whole thing gets a

May , The same homeowners that had Steve s crew build a custom shed have contracted him again to construct a new, composite deck on the back of their home They went with brand I removed an old deck that was attached to ledger boards in the corner of the exterior I understand that your ledger